Sandalwood & Eucalyptus Fragrance Oil
Herbal-woody with eucalyptus, sandalwood, sage, cedar, and soft musky undertones.
The scent
Sandalwood & Eucalyptus Fragrance Oil opens with crisp, herbal eucalyptus, delivering an instantly clean and invigorating burst of freshness. The heart unfolds with smooth, creamy sandalwood, adding calm warmth and gentle depth to the blend. As it settles, soft cedar and fresh sage create a balanced, grounding base that lingers beautifully. Refreshing yet soothing, this herbal-woody fragrance is perfectly suited to year-round collections, spa-inspired scent ranges, and wellness blends designed to promote relaxation and revitalising comfort.
Branding ideas for your range
Making candles or melts to sell? Here’s how this scent could look on your shelf.
Pair with clean botanical tones and minimalist finishes — ideal for spa collections, self-care ranges, and fresh fragrance lines centred around clarity and relaxation.
How much do I need?
Work out the fragrance oil for your batch.
Fragrance load is the % of the finished candle’s weight. 1 litre of Sandalwood & Eucalyptus weighs about 1.00 kg.
Blends well with
Mix with these to create your own signature scent.
Where you can use it
How much to use, and the most IFRA allows.
Recommended amounts are starting points – always test. Not recommended means the IFRA limit is too low for a good scent, not that it is banned. No fragrance oil is approved for lip products.
Details
Contains vanillin or ethyl vanillin, which can darken wax, soap and other bases over time – always test before bulk pouring. Vanillin guide
Safety & compliance documents
Open a folder and look for Sandalwood & Eucalyptus Fragrance Oil. No log-in needed.
Safety information
For the undiluted oil, from its Safety Data Sheet. Full Safety Data Sheet ›
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H411 Toxic to aquatic life with long lasting effects.
EUH208 Contains (E)-1-(2,6,6-Trimethyl-1,3-cyclohexadien-1-yl)-2-buten-1-one, 2,4-Dimethyl-3-cyclohexene carboxaldehyde, 2-Methyl-3-tolylpropionaldehyde, 3-(2H-1,3-Benzodioxol-5-yl)-2-methylpropanal, 4-tert-Butylcyclohexyl acetate, Allyl cyclohexylpropionate, alpha-Isomethyl ionone, Benzyl salicylate, Cinnamyl alcohol, Citronellol, Coumarin, Cyclooctenyl methyl carbonate, delta-Damascone, Eucalyptol, Eugenol, L-Limonene, Lauraldehyde, Limonene, Linalool, Methyl alpha-ionone isomers, Methyl atratate, Methylundecanal, Nerol, Reaction mass of benzenepropanal, 4-Ethyl-α,α-dimethyl- and 3-(2-ethylphenyl)-2,2-dimethylpropanal, Undec-9(10)-enal. May produce an allergic reaction.
Reviews
No reviews yet – be the first to review this scent.
★ 4.94 from 6,552 customer reviews across our range
Questions
Common questions
What does Sandalwood & Eucalyptus fragrance oil smell like?
Herbal-woody with eucalyptus, sandalwood, sage, cedar, and soft musky undertones. Top notes: eucalyptus. Heart: sandalwood. Base: cedar, sage. It’s inspired by a well-known designer fragrance – see which one in our designer dupe chart.
How much Sandalwood & Eucalyptus fragrance oil do I need for a candle?
Use 5–10% of the candle’s total weight. For a 200g candle that’s 10–20g of Sandalwood & Eucalyptus (about 10–20ml). There is no IFRA limit for candles. The calculator above works it out for any size.
How much Sandalwood & Eucalyptus should I use in wax melts?
Use 5–10% – that’s 5–10g of fragrance oil for every 100g of finished melts. Check the maximum your wax can hold.
Can I use Sandalwood & Eucalyptus in a reed diffuser?
Yes. Use 15–25% Sandalwood & Eucalyptus in a reed diffuser base such as Augeo Clean Multi. The IFRA maximum is 38%. Ready-made reed diffuser CLP labels and an SDS are in the documents above.
Can I use Sandalwood & Eucalyptus in soap, lotion or perfume?
- Soap: yes – 3–6% (IFRA maximum 24%)
- Body lotion: yes – 0.5–1.5% (IFRA maximum 3.14%)
- Face cream: yes – 0.1–0.5% (IFRA maximum 3.14%)
- Perfume: yes – 5–12.28% (IFRA maximum 12.28%)
- Lip balm: not suitable
Soap, lotion and perfume are cosmetics, so each one needs a safety assessment (CPSR) before you sell it.
Is Sandalwood & Eucalyptus fragrance oil hazardous?
Undiluted, Sandalwood & Eucalyptus is classified under GB CLP with the signal word Warning:
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H411 Toxic to aquatic life with long lasting effects.
Candles, wax melts and diffusers you make with it may need their own CLP label. Full details are in the Safety Data Sheet.
Is Sandalwood & Eucalyptus fragrance oil flammable?
No. Its flash point is 85°C, so it isn’t classified as flammable. Like any fragrance oil, keep it away from naked flames.
Will Sandalwood & Eucalyptus discolour my wax?
It may. Sandalwood & Eucalyptus contains vanillin (0.2%), which can turn wax, soap and other bases cream to brown over time. Test before bulk pouring – see our vanillin guide.
Which designer fragrance is Sandalwood & Eucalyptus inspired by?
Sandalwood & Eucalyptus is inspired by a well-known designer fragrance. Find out which one in our designer dupe chart.
Is there a CLP label for Sandalwood & Eucalyptus?
Yes. Our free CLP label creator makes a ready-to-print label for candles and wax melts made with Sandalwood & Eucalyptus, and for reed diffusers. Safety Data Sheets, IFRA certificates and label files are in the documents above.
Are your fragrance oils vegan?
Yes. All are 100% vegan with no animal-derived ingredients.
Can I use Sandalwood & Eucalyptus in an electric diffuser or oil burner?
Yes.
- Electric water diffusers (ultrasonic or humidifier style) – fill the tank with water to the line, then add 3–5 drops per 100ml of water. Start low and add more to taste.
- Oil burners – mix 50/50 with dipropylene glycol (DPG), or add a few drops to water in the well.
Important – look after your diffuser:
- Fragrance oils are concentrated, and some plastics used in diffuser tanks can soften, cloud or crack if oil is left sitting in them. This depends on the plastic the diffuser is made from. It happens with any concentrated fragrance or essential oil, not just ours.
- Empty the tank when you’ve finished. Don’t leave water and oil sitting in it between uses.
- Rinse and wipe the tank every few uses, as fragrance oils can leave a film.
- Check your diffuser’s instructions to make sure it is suitable for fragrance oils. If it says essential oils only, or doesn’t say, ask the maker before using it.
How do I use the 100ml bottles?
They include a blind plug to prevent leaks in transit. Either pierce the centre with a pin or biro to use it as a dropper, or remove the stopper, pour, and replace the plug.
Ask a question about Sandalwood & Eucalyptus
No customer questions yet. Our team answers and publishes questions here.
Be the first to review “Sandalwood & Eucalyptus Fragrance Oil”
You must be logged in to post a review.
Trademark disclaimer: This fragrance oil is inspired by a well-known designer fragrance style. It is not affiliated with, endorsed by, manufactured by, or associated with the brand owner. All trademarks, brand names and copyrights remain the property of their respective owners and are used strictly for descriptive and comparative purposes only. Unsure which designer-style fragrance this scent is inspired by? View our fragrance dupe chart.

Reviews
There are no reviews yet.